Product Description

FIVE-AXIS SERVO MANIPULATOR FOR EJECTOR-END INSTALLATION — The BRTV13WDS5P0 is designed for horizontal injection molding machines from 320T to 700T, with an installation method different from traditional beam robots — products and sprue are placed at the ejector end of the machine, saving 30–40% of installation space.
DOUBLE-ARM TELESCOPIC DESIGN — Features a double-cut arm with telescopic product arm and runner arm. The vertical stroke is 1300 mm and the traverse total length is 6 metres, enabling broad product placement range and full utilisation of ejector space for more flexible production layouts.
FULL FIVE-AXIS AC SERVO DRIVE — All axes — traverse, vertical, and crosswise — are driven by five-axis AC servo motor. The integrated driver and controller system features fewer signal lines, long-distance communication, strong anti-interference ability, high accuracy of repeated positioning at ±0.05 mm, and simultaneous multi-axis control.
SPACE SAVING WITH HIGH PRODUCTIVITY GAIN — The ejector-end installation approach saves 30–40% of machine installation space compared to traditional gantry robots. After installation, production capacity increases by 20–30%, reducing defective rates, ensuring operator safety, and enabling precise output control to reduce waste.
RELIABLE AND LOW MAINTENANCE — With a maximum payload of 8 kg, dry cycle time pending confirmation, and ±0.05 mm repeatability, the BRTV13WDS5P0 delivers long service life and low failure rate across demanding production environments for mid-to-large tonnage presses.

描述

FIVE-AXIS SERVO MANIPULATOR FOR EJECTOR-END INSTALLATION — The BRTV13WDS5P0 is designed for horizontal injection molding machines from 320T to 700T, with an installation method different from traditional beam robots — products and sprue are placed at the ejector end of the machine, saving 30–40% of installation space.
DOUBLE-ARM TELESCOPIC DESIGN — Features a double-cut arm with telescopic product arm and runner arm. The vertical stroke is 1300 mm and the traverse total length is 6 metres, enabling broad product placement range and full utilisation of ejector space for more flexible production layouts.
FULL FIVE-AXIS AC SERVO DRIVE — All axes — traverse, vertical, and crosswise — are driven by five-axis AC servo motor. The integrated driver and controller system features fewer signal lines, long-distance communication, strong anti-interference ability, high accuracy of repeated positioning at ±0.05 mm, and simultaneous multi-axis control.
SPACE SAVING WITH HIGH PRODUCTIVITY GAIN — The ejector-end installation approach saves 30–40% of machine installation space compared to traditional gantry robots. After installation, production capacity increases by 20–30%, reducing defective rates, ensuring operator safety, and enabling precise output control to reduce waste.
RELIABLE AND LOW MAINTENANCE — With a maximum payload of 8 kg, dry cycle time pending confirmation, and ±0.05 mm repeatability, the BRTV13WDS5P0 delivers long service life and low failure rate across demanding production environments for mid-to-large tonnage presses.

其他信息

Model	BRTV13WDS5P0
Category	Five-axis Servo Manipulator (五轴伺服机械手)
Power Source	3.4 kVA
Recommended Machine	320T – 700T injection molding machines
Drive Method	Five-axis AC Servo Motor (Traverse, Vertical, Crosswise)
Weight	Non-standard
Max Loading	8 kg
Repeatability	±0.05 mm